Barco DCS 200 Dual Channel Scaler Switcher for rent in Minneapolis Minnesota short long term rental

The DCS-200 is a dual-channel switcher designed to provide true seamless switching between different input sources and formats, while maintaining superb scaling quality at an affordable price. It has been designed for straightforward and simple operations, which makes it the ideal seamless switcher for live events, boardrooms, hotel ballrooms, houses of worship, lecture halls, training facilities and more.

Processing

True seamless switching
High quality scaling technology
10-bit sampling and internal processing/scaling
Auto-acquire and auto-positioning
Up to three (3) LOGO stores/recall capability
Luma keying/utilizing DVI
Low video delay

Inputs

All resolutions from NTSC/PAL up to UXGA. Including all HD resolutions
DVI, analog computer and video, HD/SD SDI

Outputs

All progressive resolutions from 480p up to UXGA, including all HD progressive resolutions
Full screen
Supports HDCP compatible projectors
Built-in test pattern simplifies projector alignment

Preview output

Progressive resolutions from 480p up to UXGA, including all HD progressive resolutions
DVI and HD-15 connectors available (both active)

Mechanical

Auto ranging power supply
Width: 19” rack
Height: 2RU
Operating temperature range: 0° to 40°C (32° to 104°F)

Front panel control
Display section	Four (4) line, 128×32 VFD Display Menu navigation via rotary encoder knob, Select/Escape buttons
Inputs section	Ten buttons select the corresponding input source, or the stored LOGO image, to be placed on program after the TAKE button is pressed. There are three button states: Off: The source is not currently on program Blinking: The source has been selected and will be placed on program after the TAKE button is pressed Yellow: The source is on program.
Effects section	FRZ: Instantly freezes the current image that is on program. BLK: Cuts the program to black KEY: The key source will transition to/from program, after the TAKE button is pressed TAKE: Transitions the selected source or KEY at the pre-selected rate.
Inputs
Six analog inputs via HD-15 VGA connectors	Supports YPbPr, RGBHV, S-video and composite 10-bits/color sampling at maximum 170 MHz True pixel mapping (1:1) for signal resolutions up to 1600×1200@60 Hz. Sources with higher pixel rates (1920x1080p@60, 1920×1200@60 and 2048x1080p@60) are also supported.
Two digital or analog inputs via DVI-I connectors	8-bit digital input per DDWG 1.0 with HDCP support. RGBHV data via analog pins of the DVI-I connector The digital source will be processed if valid DVI signals are detected. The Analog source can be selected via the front panel menu.
Serial digital input (HD/SD SDI) via BNC connector	SD SDI per SMPTE 259M-C (NTSC/PAL resolution) HD SDI per SMPTE 292M (HDTV)
Outputs
Program output	Provided in digital format on the DVI-I program connector and in analog format on the HD-15 Program connector. Progressive resolutions at RGBHV HDCP encryption support for DVI signals
Preview output	Provided in digital format on the DVI-I preview connector and in analog format on the HD-15 preview connector Progressive resolutions from 480p up to UXGA, including all HD progressive resolutions